Nortel Meridian 1 Option 11C Planning And Installation Manual page 66

Page 66 of 408 System and site requirements
Figure 24
Typical placement of NTAK75 (horizontal cabinet expansion)
553-3021-210 Standard 7.00
The center line of the NTAK75 may be placed a maximum of 0.5 ft (152 mm)
to the right and 2.5 ft (760 mm) to the left of the cabinet center line. These
distances are based on the cabinets being mounted at the recommended
mounting heights, shown in the diagram above, for the horizontal mounting
configuration.
January 2002