Nortel Meridian 1 Option 11C Planning And Installation Manual page 120

Page 120 of 408 Mounting the cabinets
Mounting the cabinet on the floor
Items required
553-3021-210 Standard 7.00
To mount the cabinet on the floor you need:
• the optional pedestal for floor mounting
• four #14 screws provided to secure the cabinet to the pedestal
• the equipment layout plan as developed on page 56.
Procedure 6
Floor mounting
An empty cabinet weighs 25 lb (12 kg). Get help to lift the cabinet if
necessary.
1 Remove the main cabinet (or expansion cabinet if the main
cabinet has been installed) from its carton and remove its front
cover.
If the front cover lock latches are in their locked position, use a
screwdriver and turn the lug on each latch 90° to the unlocked position
(Refer to Figure 43 on page 121).
Simultaneously slide both latches in towards the center of the cabinet.
Grasp the sides of the cover and pull the top outwards, then lift it
upward to remove it from the cabinet.
January 2002
WARNING