Nortel Meridian 1 Option 11C Planning And Installation Manual page 135

3 Insert the power supply into the first slot on the left of the card
shelf (refer to Figure 48 on page 132).
4 Lock it into place with the card tabs.
5 Attach the power line cord to the connector on the left side of the
power supply (see Figure 50 on page 135) by feeding the cord up
through the card guides.
Figure 50
AC power cable connection
Commercial AC power connection
Clip at rear of cabinet
6 Secure the power line cord in place using the clip at rear of
cabinet. See Figure 50 on page 135.
7 Route the rest of the power line cord down through the opening
at the bottom of the cabinet.
Installing the power supplies Page 135 of 408
Optional battery backup
DC power connection
Option 11C Planning and Installation Guide