Nortel Meridian 1 Option 11C Planning And Installation Manual page 87

5 Slots and openings in the cabinet and the back or bottom are provided for
ventilation, to protect it from overheating. These openings should never
be blocked or covered.
6 The openings on a telephone should never be blocked by placing the
product on the bed, sofa, rug, or other similar surface. The product should
never be placed near or over a radiator or heat register. The product
should not be placed in a built-in installation unless proper ventilation is
provided.
7 The product should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of power
supply, consult your distributor.
8 Some equipment is equipped with a three-wire grounding type plug: a
plug having a third grounding pin. The plug will only fit into a grounding
type power outlet. This is a safety feature. If you are unable to insert the
plug into the outlet, contact your electrician to replace the obsolete outlet.
Do not defeat the purposes of the grounding-type plug.
Some equipment is equipped with a polarized line plug: a plug having
one blade wider that the other. This plug will fit into the power outlet
only one way. This also is a safety feature. If you are unable to insert the
plug fully into the outlet, try reversing the plug. If the plug still doesn't
fit, contact your electrician to replace the obsolete plug. Do not defeat the
purpose of the polarized plug.
9 Do not allow anything to rest on the power cord. Do not locate the
product where the cord will be abused by persons walking on it.
10 Do not overload wall outlets and extension cords as this can result in the
risk of fire or electrical shock.
11 Never push objects of any kind into the product through cabinet slots as
they may touch dangerous voltage points, or short out parts that could
result in a risk of fire or electrical shock. Never spill liquid of any kind
onto the product.
12 To reduce the risk of electrical shock, do not disassemble a non-operating
product.
Important safety instructions Page 87 of 408
Option 11C Planning and Installation Guide