Ntag26 Xmfr Card; Nt5K21 Xmfc Card - Nortel Meridian 1 Option 11C Planning And Installation Manual

NTAG26 XMFR card

The function of the XMFR (Extended Multi-Frequency Receiver) card is
provided on the NDK20EA SSC card. However, this card can coexist with the
SSC card if access to extra XMFR capability is required.
The XMFR card is used to receive MF digit information. Connections are
made between a PBX and a CO. Features such as Automatic Number
Identification (ANI), Meridian 911 (M911) and Feature Group D (FGD) are
supported on the Option 11C by the IPE MF Receiver.
Procedure 28
XMFR card installation
1 Insert the NTAG26 card in its assigned slot.
The NTAG26 card can be installed in slots 1 through 30.
2 Configure and enable the card through overlay 13 and 34.
After the card is enabled, the LED will flash three times to indicate it is
conducting a self-test. If the LED remains lit, then the self-test has
failed.

NT5K21 XMFC card

The function of the XMFC (Extended Multi-frequency Compelled
Sender/Receiver) card is provided on the NDK20EA SSC card. However, this
card can coexist with the SSC card if you wish to access extra XMFC
capability.
The XMFC card provides four channels of R2 Standard signalling capability.
Procedure 29
XMFC card installation
1 Insert the NT5G21 card in its assigned slot.
The card can be installed in slots 1 through 30.
2 Configure and enable the card through overlay 13 and 34.
After the card is enabled, the LED will flash three times to indicate it is
conducting a self-test. If the LED remains lit, then the self-test has
failed.
Installing the circuit cards Page 193 of 408
Option 11C Planning and Installation Guide