Equipment Layout Plan For Wall Mounting - Nortel Meridian 1 Option 11C Planning And Installation Manual

System and site requirements Page 59 of 408

Equipment layout plan for wall mounting

Typical wall layouts using BIX cross-connection equipment are shown in
Figure 20 on page 61 and Figure 22 on page 64. Use of other types of terminal
blocks and equipment will alter the layout. As a result, you may need to adjust
the height at which you place the cabinets in relation to other equipment. You
may also need to adjust the distances the power outlets are from the
backboard on AC powered systems. The positions for the mounting brackets
are shown in Figure 21 on page 62.
Option 11C Planning and Installation Guide