Nortel Meridian 1 Option 11C Planning And Installation Manual page 150

Page 150 of 408 Installing System Controller Cards
553-3021-210 Standard 7.00
Figure 58
EMC Grounding Clip
Note 1: The EMC grounding clip is installed on the front of the stiffener
rail on the Option 11C IP cabinet. There is a small #4-40 screw to fasten
the clip to the stiffener rail. The 100BaseT cable is then fed through and
secured in the clip.
The grounding clip is required to ensure EMC compliance.
January 2002
Stiffener Rail
EMC Grounding
Clip
IMPORTANT