ASCOM Ascotel 2025 System Manual page 662

Example: Enquiry Call behind PBX
This feature is described in Part 2 under "Hold (Enquiry Call)", Page 2.324. It can
be used from both analogue terminals and system terminals.
Fig. 3.8: Enquiry call behind PBX
Procedures with different terminals
• Analogue terminal
– Flash: l
– Flash *42: idle tone from Ascotel
• Office Terminals
– Enquiry call menu: idle tone from Ascotel
– Key with macro: idle tone from up-circuit PBX
Using the Exchange's Features
To activate features on the public network such as the exchange feature "Diver-
sion" from the system itself, you need to seize a trunk line. The feature can then
be entered in accordance with the service provider's operating instructions.
See also:
System configuration:
– Down-circuit from the PBX; network interfaces
– Dialling method; network interfaces
HBT_20321104_03/B0_en
ascom
PBX Ascotel
Ascotel 2025/2045/2065
a/b
AD2
S bus
haz0825aaena0
Planning a PBX 3.31