Disconnect the System from the System Power
As soon as there are no more active connections in the prebarred, the system can
be disconnected from the power supply. If using a UPS, first disconnect the bat-
teries and then pull out the mains plug.
Hazard:
Expansion cards can be damaged by electrical voltage.
Always disconnect the power supply before fitting or removing any
cards!
Fig. 7.9:
Warning plate on the PBX
HBT_20321104_07/B0_en
1
haz1254aadea0
Hardware Updates and System Expansion
ascom
Ascotel 2025/2045/2065
2
7.27