ASCOM Ascotel 2025 System Manual page 299

ascom Ascotel 2025/2045/2065
Routing without Direct Dialling
A call without a suitable direct dial number is routed to the call destination via the
call distribution element allocated in the trunk group.
PINX 1
222 22 20
T2
T
a/b
[1]
Network
connections
T2
T
Se
[1] One and the same trunk group cannot contain both analogue and digital network interfaces.
Fig. 2.62: Routing a call from the public network without direct dialling
Tab. 2.27: Setting the routing parameters
Parameter
Trunk group 1:
• Network interfaces
• Incoming connection
• Network type
• Protocol
• Overwrite NPI
• Direct dialling plan
• Call distribution element
Call distribution element 1:
• Destinations
• Incoming connections
1)
Not relevant for trunk groups with analogue network interfaces
2.122 Call Routing
PINX 2
Trunk group 1 (DSS1)
-> Call distribution 1
-> Direct dialling plan 1
Subscriber
KT line
Switchover
Trunk group 2 (PSS1)
-> Direct dialling plan 2
Parameter value
Network interfaces in this trunk group
Number of connections allowed simultaneously
1)
Public
1)
DSS1
1)
No
1 (relevant only if a suitable DD number is found)
1 (reference number of a call distribution element)
Switching position 1: SC 220 + KT
Number of connections allowed simultaneously
PINX 1
Direct dialling plan 1
DD No. -
Direct dialling plan 2
DD No. 20
-> Call distribution 3
haz0728aaena0
Call distribution 1
-> SC 220 + KT
Call distribution 2
-> SC 220 + KT
Call distribution 3
-> SC 220 + KT
HBT_20321104_02/B0_en
220
1/n
220
2/n
220
3/n