ASCOM Ascotel 2025 System Manual page 716

Tab. 3.29: The measured values and what they mean
Value Meaning
> 60 Very good quality
40 to 60 Good quality
30 to 40 Mostly good quality. Crackle interference is possible depending on the position, especially
when moving. A check with the test handset is recommended
25 to 30 Still accessible but stronger interference is possible, check with test handset. A good call
quality will be possible during operation provided the user stands still.
below 25 No stable connection possible.
A value of at least 40 should be measurable in the overlap area of the two radio
units.
Once the coverage range of the two radio units has been measured out, the radio
units are repositioned. It may also make sense to measure out only part of the sup-
ply range and then to shift only one of the two radio units.
Please note
• Make sure the test handset is logged on or re-registered with the correct radio
unit.
• Make sure there is only one test handset in the critical area.
Tip:
To increase efficiency, 2 people can measure simultaneously with the 2
standard handsets. In this case the test handsets are used for communi-
cating with each other.
If you are unsure which value belongs to which radio unit, you can
retrieve the information using the "i" key. The top line then displays the
identification of the radio unit marked with "<". Press "i" a second time
to display all 4 radio units once again.
HBT_20321104_03/B0_en
ascom Ascotel 2025/2045/2065
Planning DECT Systems 3.85