ASCOM Ascotel 2025 System Manual page 753

ascom Ascotel 2025/2045/2065
Region Selection via Local Area Network
With this variant, too, the regions of the other systems are entered in each system.
In this case, however, a route with the region's call number is provided for each
region in the numbering plan. Simply change the call number of the routes in all
three systems:
1. Change the call number of the routes in system 1:
– Route 1-6: Call number 50
– Route 1-7: Call number 60
2. Change the call number of the routes in system 2:
– Route 2-5: Call number 40
– Route 2-7: Call number 60
3. Change the call number of the routes in system 3:
– Route 3-5: Call number 40
– Route 3-6: Call number 50
A route number prefix (exchange access prefix for the local area network) is
always truncated before the call is forwarded. As with this variant the route
number prefix is also the region prefix, the latter is lost. To ensure that a call can
nonetheless be routed to its destination via several transit systems, the regional
prefix has to be added once again.
For this enter the regional prefixes in the route configuration under "Send Access
Code":
1. Enter the regional prefixes of system 1:
– Route 1-6: Send access code = 50
– Route 1-7: Send access code = 60
2. Enter the regional prefixes of system 2:
– Route 2-5: Send access code = 40
– Route 2-7: Send access code = 60
3. Enter the regional prefixes of system 3:
– Route 3-5: Send access code = 40
– Route 3-6: Send access code = 50
3.122 Planning a Private Network HBT_20321104_03/B0_en