ASCOM Ascotel 2025 System Manual page 452

Data Lines
Tab. 2.106: Data lines for protocol format
Content, meaning
Space
Subscriber (cost centre) number
Sort character
Date of start of connection
Time of start of connection
Duration of connection
Trunk card number / network interface number /
primary channel group
Charges
3)
Call number dialled
Serial number
Carriage Return
Line Feed
1)
Dialling determines whether Subscriber No. or CC No. is displayed. With exchange access 0 or 10, the
SC No. is displayed; if exchange access with CC No. 13 is used or if charging is switched to the cost centre
during the call using *78, the CC No. is displayed. Subscriber numbers are always output with format
"|- SP"; cost centre numbers, always with format "00 -|".
As a cost centre number this field can be 5 or 9 digits long. Depending on the configured cost centre
length £ 5, the field is 5 characters long. As of cost centre length ³ 6, the length is 9 characters. If the
cost centre length ³ 6, all the offsets following the cost centre are incremented by 4 characters.
2)
The trunk card number is output in position "bb"; the network interface number in "pp"; and the pri-
mary channel group "0" in "c" (see example).
3)
With "Data protection ON" the last 4 digits of the number are replaced by "." (full stop) characters.
In Switzerland and other countries this applies to private calls (data protection for business calls never
active); in Germany, business calls (data protection for private calls never active).
HBT_20321104_02/B0_en
1)
2)
ascom Ascotel 2025/2045/2065
Structure
SP
ttttt
ooo
ddmmyy
hh:mm
hhHmmMss
bb.pp/c
ggggggg.gg
zzzzzzzzzzzzzzzzzzzz
llll
CR
LF
Format Length Print
2
|- SP 5
00 -| 3
00 -| 6
00 -| 5
00 -| 8
00 -| 5
SP -| 10
|- SP 20
00 -| 4
1
1
Call Logging (CL)
offset
0
2
8
12
19
25
34
40
51
72
76
77
2.275