ASCOM Ascotel 2025 System Manual page 323

ascom Ascotel 2025/2045/2065
Tab. 2.35: Setting the routing parameters
Parameter
Call distribution element 1:
• KT route
Route 1:
• Trunk groups
• Outgoing connections
• Digit barring
• Numbering plan identifier NPI
Trunk group 1
• Network interfaces
• Network type
• Protocol
1)
Not relevant for trunk groups with analogue network interfaces
Call to the public Network via an Operator Console
Dialling via a line key of Company A routes the call via Route 1.
Dialling via a line key of Company B routes the call via Route 2.
Call to a virtual Network PISN Subscriber
The virtual network PISN subscriber is integrated in the PISN via the public net-
work. Therefore the call to a virtual network PISN subscriber is routed via the pub-
lic network.
The PISN subscriber must be created in the internal numbering plan. The caller
dials the PISN subscriber number.
The routing information on the PISN subscribers is allocated to the subscriber con-
figuration and includes the route to be used and the phone number under which
the destination subscriber can actually be reached (the phone number is indicated
without exchange access prefix). In the following example the PISN subscriber
with phone number 440 can be reached in the public network under phone
number 333 33 40.
2.146 Call Routing
Parameter value
1 (route reference number)
1 (reference number of one or more trunk group(s))
Number of connections allowed simultaneously
Yes (poll digit barring)
E.164
Network interfaces of this trunk group
1)
Public
1)
DSS1
HBT_20321104_02/B0_en