Measurements - ASCOM Ascotel 2025 System Manual

ascom Ascotel 2025/2045/2065
5.6

Measurements

We are assuming that the project planner is familiar with the information con-
tained in the previous sections of this document. The equipment should be set in
accordance with "General / Function", Page 3.60.
A Word about handling Batteries
The batteries supplied with the test kit are state of the art. Nonetheless a few
points need to be observed to ensure perfect operation:
• It takes a few charge cycles for the batteries to reach their nominal capacity.
Therefore discharge / charge the batteries several times before use; the charg-
ing unit inside the test kit provide the discharge function.
• Self-discharge amounts to around 1% per day. Re-charge before use; this
process takes only a short while with the charging unit.
• Always remove the batteries from the equipment as soon as the measurements
are completed and recharge them immediately.
• The batteries need to be discharged / recharged from time to time if they not
used for a longer period of time.
3.82 Planning DECT Systems HBT_20321104_03/B0_en