ASCOM Ascotel 2025 System Manual page 752

Under the subscriber configuration are the PISN subscribers you have just created,
with the numbers 40XXX, 50XXX and 60XXX.
The setting options for PISN subscribers differ from those of ordinary internal sub-
scribers. Next use the "route" setting to allocate routes to the PISN subscribers:
1. Assign the routes for the PISN subscribers of system 1:
– PISN subscriber 50XXX: route 6
– PISN subscriber 60XXX: route 7
2. Assign the routes for the PISN subscribers of system 2:
– PISN subscriber 40XXX: route 5
– PISN subscriber 60XXX: route 7
3. Assign the routes for the PISN subscribers of system 3:
– PISN subscriber 40XXX: route 5
– PISN subscriber 50XXX: route 6
Make sure the "Number" is left blank. It is used, for example , if the subscribers
are to be linked up in a virtual network.
As with the numbering method using blocks you can also create complete num-
bers as PISN subscribers for dialling by name.
60210
A
Newton
A
Fig. 3.68: Entering a separate PISN subscriber (example)
HBT_20321104_03/B0_en
PISN SC 60xx PISN SC 60xx
60210
-> Route 7 -> Route 7
PINX 1
Region 40
PISN SC
60220
60220
Newton I.
-> Route 7 -> Route 7
PINX 1
Region 40
ascom
60210
SC 210
PINX 2
Region 50 Region 60
PISN SC
60220
60220
SC 220
Newton I.
Newton I.
PINX 2
Region 50 Region 60
Planning a Private Network
Ascotel 2025/2045/2065
haz0805aaena0
210
210
B
PINX 3
Mr Newton
220
B
PINX 3
3.121