ASCOM Ascotel 2025 System Manual page 384

Configuration example
The PINXs of a company with branch offices in Zurich and Geneva respectively are
connected with each other via a dedicated line. Outgoing calls made from Geneva
to the local rate zone in Zurich are always to be routed into the public network at
Zurich.
Incoming calls for the branch office in Geneva are always to be routed from the
public network to PINX 1 in Geneva.
CLIP-Nr. 022 827 99 55
01 813 33 95
Kloten
Fig. 2.103: Topology with important points
Planning the Routes and Trunk Groups
To keep a network configuration as transparent as possible, it is a good idea
always to use the same trunk group and the same route for the same function on
all the PINXs. It makes sense, for example, to use trunk group 1 in each PINX for
connections to the public ISDN network as trunk group 1 has this initialization
value.
HBT_20321104_02/B0_en
LCR for break-out via PINX 2
022 827 9x xx
Route:
NPI = E.164
01 296 1x xx
Special arrangement
haz0746aaena0
ascom Ascotel 2025/2045/2065
Subscriber configuration:
Automatic CLIP = No
Geneva
LCR
PINX 1
01 813 33 95
Transit route
PINX 2
Zurich
955
022 827 99 55
Call Routing 2.207