ASCOM Ascotel 2025 System Manual page 245

ascom Ascotel 2025/2045/2065
DDI number Call distribution
element
2
200
3
201
4
202
101
299
1. Create
1. When direct dial numbers are created, call distribution elements are assigned automatically.
2. Several direct dial numbers can be allocated to one call distribution element.
3. For performance reasons unused call distribution elements should be deleted.
Fig. 2.35: Linking direct dial numbers with call distribution elements
Destinations can be allocated to the linked call distribution elements as soon as
they are created. Various options can be selected using the setting "Link matching
subscribers" (Tab. 2.20).
Tab. 2.20: Using the "Link matching subscribers" setting to allocate the destinations for the
call distribution elements
Parameter value
no
yes,
do not create non-matching
yes,
create non-matching also
The system only provides direct dialling plans for digital network interfaces.
Other Subjects Related to Direct Dialling Plans:
Trunk group, Call distribution, Incoming traffic, Traffic in the PISN, Iden-
tification elements, Numbering plan.
2.68 Routing Elements
DDI number
Reference
number
200
201
202
299
2. Allocate
Result
A common call distribution destination can be allocated to all the DDI
numbers, depending on the switch position. Initialization value: UG 16
A DDI number will only be created if an internal subscriber with the same
number already exists. The subscriber will be allocated as the call distribu-
tion destination , whatever the switch position.
All the DDI numbers of the new block will be created. If internal subscrib-
ers with the same numbers exist they will be allocated as call distribution
destination. A common call distribution destination can be allocated to all
the other DDI numbers, depending on the switch position. Initialization
value: UG 16
Call distribution
element
2
3
4
101
HBT_20321104_02/B0_en
DDI number Call distribution
element
2
200
400
201
4
202
444
101
299
haz0781aaena0
3. Delete