ASCOM Ascotel 2025 System Manual page 1010

Initiating an Upload Process
To ensure a successful software upload, carry out the following preparatory steps:
1. Recommendation: Save the configuration data using AIMS (see "Saving Con-
figuration Data with AIMS", Page 7.19).
2. Call up the AIMS Upload Manager.
3. Select the "Upload" tab.
4. Enter the password for access to the PBX.
5. Select the system type.
6. Click the "Add" button in the "Software Version" field and specify the direc-
tory containing the zip-file with the system software you want to install.
The software version you have added appears in the list box.
7. Select the software version you want from the list box.
8. Select the PBX connection (see "PBX Connection", Page 7.7):
– Local access (PC connection to the V.24 interface of the mainboard or PA)
– Via dial-up access (ISDN, PC connection on the S/T interface)
– Via LAN (PC connection to the Ethernet interface on the basic systems)
9. If required, use the "Settings" button to set the connection parameters (see
"Setting", Page 7.8).
10. Select the "Activation, Monitoring" tab.
11. Set the time at which you want the newly loaded system software to be acti-
vated.
12. Set the period of time during which you want the newly loaded system soft-
ware to be monitored for fault-free operation.
13. Click the "Upload" button.
The upload process is now initiated.
Bar Indicator
During the software upload a dialog box with a horizontal bar indicates the time
progress of the upload process.
If you need to stop the upload at any stage, click the "Cancel" button. The soft-
ware upload is then stopped and the current system software remains in opera-
tion.
HBT_20321104_07/B0_en
ascom Ascotel 2025/2045/2065
Data Maintenance 7.11