ASCOM Ascotel 2025 System Manual page 1129

ascom Ascotel 2025/2045/2065
L
Local Area Network (LAN)
Line key
Licence information
Liquid Crystal Display (LCD)
Least Cost Routing (LCR)
Light Emitting Diode (LED)
Licence Code (LIC)
Long distance code
M
Multiple Subscriber Number (MSN)
N
National Destination Code (NDC)
Network
Network interface
Network Terminator
Networking over Internet Protocol (NoIP)
Node
Numbering Plan Identifier (NPI)
9.12 Glossary
Computer network for geographically limited region
Key on a ® key telephone that is allocated to a KT line or on
® Operator Console (previously: aggregate key).
Regulates the activation of licensed attributes. Consists of the
® Licence Code and the ® EID, and is stored on the ® EIM
card
Liquid crystal display
Routing function used to determine the network operators via
which a call is to be routed. Usually the most cost-effective
route is selected.
Light emitting diode: light source used for signalling purposes
Part of the ® licensing information
® National destination code
Allocates several call numbers to one ISDN basic access (multi-
ple subscriber number)
Code used for identifying national networks, the long-distance
code
® Private or ® public network
Network-side PBX interfaces
Network termination
Transmits voice data and QSIG signalling as IP data packets in
the intranet
Branch point or end point in a communication network. The
nodes of a ® PISN are the ® PINXs.
1. Numbering plan type:
In the public network, the numbering plan identifier used is
® E.164.
In the private network, the numbering plan identifier used
is ® PNP.
2. Configuration parameter used for specifying the number-
ing plan identifier. Parameter values: E.164 / PNP /
unknown
HBT_20321104_09/B0_en