ASCOM Ascotel 2025 System Manual page 989

ascom Ascotel 2025/2045/2065
Testing the Connections in the PISN with Virtual Networking
1. Dial an internal number in the PISN.
2. Activate automatic callback.
3. Test the incoming connection of a virtual subscriber.
Testing into the Public Network (Break-out)
1. Connect all the lines to the public network from various PINXs in the PISN and
enable them via the configuration.
2. Dial a public subscriber who is geographically close to a PINX.
3. Set up the connection.
4. Check whether the connection was actually set up from the PINX closest to
the public destination.
5. Dial a public subscriber who is geographically close to a different PINX.
6. Set up the connection.
7. Check whether the connection was actually set up from the PINX closest to
the public destination.
See also:
Information on break-out in "Break-Out", Page 1.52 and "Break-out",
Page 2.206.
Testing the Substitution
1. Dial the destination subscriber in the PISN who activated the substitution.
2. Set up the connection.
Testing the Call Diversion
1. Dial the destination subscriber in the PISN who activated call diversion (inter-
nal or external).
2. Set up the connection.
6.16 Function Check HBT_20321104_06/B0_en