Status Display - Basic System - ASCOM Ascotel 2025 System Manual

ascom Ascotel 2025/2045/2065
4.3 Operating State and Error Displays
7
4.3.1 Status Display – Basic System
The mainboard has a 7-segment display which indicates the system's current
operating state, depending on the mode selected.
The main operating state displays in normal mode are listed below. The HEX
rotary switch has to be on position 0, 2 or 5. A description of the various HEX
rotary switch positions can be found in "Switch Positions of the HEX Rotary
Switch", Page 7.62
Tab. 7.9: Operating state displays of the 7-segment display in normal mode
7-segment display
1)
Combinations of displays are possible
Note:
If the HEX rotary switch is in position B, the current software version will
be displayed instead of the port states.
7.58 Operations Supervision
Detailed description
1)
Point is flashing
1)
Upper segment lit
1)
Middle segment lit
1)
Lower segment lit
State / Remarks
System in operation
Internal port in operation
External port in operation
PBX prebarred
HBT_20321104_07/B0_en