ASCOM Ascotel 2025 System Manual page 217

ascom Ascotel 2025/2045/2065
CLIP Settings
These settings are used to truncate prefixed access digits so that the CLIP number
is as short as possible.
To enable the PBX to interface CLIP numbers correctly, the system's own regional
prefixes need to be entered under "CLIP settings":
• International and national prefixes for the PBX locations ("00" and "0" for
Switzerland, "00" and "-" for France)
• Country code and long-distance code of the PBX location (for Switzerland
"41", for Geneva "22"; see also Page 2.4)
Displaying CLIR
When CLIR is activated (suppress CLIP) the public network provider will still send
a CLIP to special customers, for instance the fire brigade and the police. The CLIR
information will, however, include the CLIP. See also Page 2.32.
In the private leased-line network a CLIP is always sent with an activated CLIR. It
is also provided with the CLIR information.
If "Display CLIR = yes", a CLIP is displayed with CLIR information.
In internal traffic, a suppressed CLIP is always displayed.
Numbering Plan
The CLIP number is prefixed with the regional prefix for outgoing calls to a PISN
subscriber or via a trunk group with "Type of network = private".
For incoming calls, the regional prefix is removed from the CLIP number (provided
it begins with that digit sequence).
2.40 Identification Elements HBT_20321104_02/B0_en