ASCOM Ascotel 2025 System Manual page 494

Call Forwarding to the Exchange
With call forwarding to the public or private network the subscriber remains acti-
vated in his user group.
This means that incoming calls to the user groups that reach the subscriber are
routed to the call forwarding destination.
Prefix Dialling Procedures
Tab. 2.132: Call forwarding: Procedures
Activate call forwarding to subscriber
Clear call forwarding to subscriber
Activate call forwarding to subscriber last configured
Clear call forwarding to subscriber last configured
Activate preconfigured call forwarding
Clear preconfigured call forwarding
Activate call forwarding to PS / general call (coded ringing)
Clear call forwarding to PS / general call (coded ringing)
Protect (own set) against call forwarding
Allow call forwarding (to own set)
System Configuration
Tab. 2.133: Call forwarding: System configuration
Parameter
Call forwarding if busy
Predefined call forwarding
Call forwarding if unobtainable
Call forwarding immediate ring
Call forwarding, forwarding time
Rerouting in the exchange
Rerouting in the exchange
Reference to other Features
Features:
• "Call Diversion", Page 2.306
• "Searching via a Paging System", Page 2.406
HBT_20321104_02/B0_en
ascom
Parameter value
Yes / No
<SC No.>
Yes / No
Yes / No
<3, 5 or 7 rings>
Yes / No
Yes / No
Ascotel 2025/2045/2065
*/# procedure
*61 destination
No.
#61
*61#
#61
*62
#62
*68
#68
*02
#02
Remarks
Subscriber configuration
Trunk group configuration
Features 2.317