Clip Display With A Virtual Pisn Subscriber - ASCOM Ascotel 2025 System Manual

ascom Ascotel 2025/2045/2065
3.4.5

CLIP Display with a Virtual PISN Subscriber

A public network subscriber can be set up as a virtual PISN subscriber in the PBX.
Internal subscribers will then perceive the subscriber as another internal sub-
scriber: A call is signalled with the internal ringing pattern. The internal number
can also be dialled for outgoing calls.
Individual mobile subscribers or entire number blocks can be integrated in this
way.
Setting up a Virtual Subscriber
A PISN subscriber is set up for this purpose (see "Numbering Plan", Page 2.40).
Enter the public network subscriber's full number under "Number". For outgoing
calls the configured number will be dialled via the configured route instead of the
dialled PISN subscriber number. This mechanism is similar to the one used for
abbreviated dialling.
When the subscriber calls up from the public network, his CLIP number will be
compared with the numbers of all the PISN subscribers. If there is a match, the
called subscriber is shown the PISN subscriber number by way of CLIP instead of
the CLIP sent from the public network.
HBT_20321104_02/B0_en Identification Elements 2.35