ASCOM Ascotel 2025 System Manual page 799

ascom Ascotel 2025/2045/2065
Connecting the PBX
[1] = Pin 1
[2] The apertures above one another are electrically connected.
Fig. 4.20: Connecting and plugging in a two-conductor pillar terminal block
No tools are required to fit the connecting wires.
1. Strip the connecting wires over 6-7 mm.
2. Fit the connecting wires into the apertures.
3. Fit the prefabricated two-conductor pillar terminal block onto the plug con-
nector on the mainboard 2025 / 2045 or expansion card.
Note:
The "Direct connection" variant with socket clamps is not suitable for
shunting..
4.28 Connecting the PBX
4
3
2
1
6 -
7
m m
[2]
4
3
2
1
[ 1 ]
HBT_20321104_04/B0_en