ASCOM Ascotel 2025 System Manual page 707

ascom Ascotel 2025/2045/2065
Selection of Multiple Radio Units to measure (Display 2)
65<––.––.––
1000101511
haz0349aaxxb0
Fig. 3.48: Measure / Group state
Measuring Multiple Radio Units
65 21.43 ––
stop clr
haz0345aaxxb0
Fig. 3.49: Measure / Group state
Note:
The simultaneous measurement of radio units is not recommended for
measurement-related reasons.
3.76 Planning DECT Systems
• Field strength value of the first radio unit in the group
• This radio unit information is shown in the status line
When the signal is too weak, a line is shown instead of the radio unit number
• Hexadecimal representation of the full RFPI
• A maximum of 4 radio units can be selected to be displayed simultaneously
with their field strength value.
• This radio unit is not recognized at present
(last measured value and dot are signalled).
• Clears all ticks
• Measurement in progress (press the Foxkey to halt the measurement).
HBT_20321104_03/B0_en