ASCOM Ascotel 2025 System Manual page 924

Network-oriented Routing Elements
9. Define the network interfaces (see "Point-to-Point and Point-to-Multipoint
Connections", Page 1.14 and "Trunk Groups of Network Interfaces",
Page 2.55)
– S external to other PINXs
– Point-to-point connections (TEI management)
– Point-to-multipoint connections (TEI management)
– Collision detection for terminals connected in parallel
– Assign the network interfaces to the trunk groups
10. Define the digital trunk groups (see "Trunk Groups", Page 2.54)
– Name
– Allocate the direct dialling plan (possibly call distribution element only)
– Allocate the call distribution element (possibly direct dialling plan only)
– CLIP information (TON / NPI)
– DSS1 / PSS1 protocol
– Private / public
– Other settings as required
11. Define the analogue trunk groups (see "Trunk Groups", Page 2.54)
– Name
– Allocate the call distribution element
12. Define the routes (see "Route", Page 2.61)
– Name
– Allocate the trunk group
– Number of outgoing connections
– NPI for the call number
– Other settings as required
13. Edit the table of clock sources.
Key Telephones
14. Allocate the line keys of the key telephones to KT lines.
(see "Key Telephones", Page 2.99)
15. Carry out limited-access settings if required.
HBT_20321104_05/B0_en
ascom Ascotel 2025/2045/2065
Configuration Steps 5.25