ASCOM Ascotel 2025 System Manual page 1038

Event / error message
Mail Server defective
Wake-up call expired
Logon error
Numbers missing
Too many network inter-
faces
Too many user-network
interfaces
ICC overflow
Radio unit defective
QSIG licence limit
!!Software update 4.6.1999
10:00
!!Software update success-
ful
!!Software upload failed
Remote maintenance ena-
bled
LCR fallback activated
No response from ACD
server
Card not functioning
Port not functioning
System crash
UPS warning
HBT_20321104_07/B0_en
Trigger condition
Voice Mail Server does not respond to
messages via V.24
Room wake-up call not answered
• Card not fitted
• Card not logged on
• Card defective
Card(s) not full logged on
• Insufficient memory reserved in the
numbering plan to enable allocation of
numbers to all subscribers.
– Type in missing numbers by hand
Too many network interfaces in the sys-
tem (in relation to the system limits)
Maximum number of user-network
interfaces exceeded
Individual cumulative counter or cost
centre counter overflow
Radio unit not responding
Maximum number of licensed outgoing
connections with QSIG protocol
exceeded
PBX to activate new software at 10.00
on 4.6.1999.
Set after the monitoring time
Set after reactivating the old software
Remote maintenance enabled
Automatic switch from primary network
provider to secondary network provider
using LCR function
ACD server defined as destination but
not responding.
A card previously in operation has
stopped functioning.
A port previously in operation has
stopped functioning.
System has crashed
PBX running on DC power supply
ascom Ascotel 2025/2045/2065
Details
Date, time
Room number, date, time
Card No., date, time, nature of
the problem: Card not logged on
or defective
Card, date, time
Card, date, time
Date, time
SC No., date, time
AD2 interface, date, time
Number per time unit
Date, time
-
-
Unfiltered output to local destina-
tions
Provider ID; number per time unit
-
Slot number
Slot number, port number
Date, time
Date, time
Operations Supervision 7.39