ASCOM Ascotel 2025 System Manual page 340

The criteria for selecting one of these network providers are shown in Tab. 2.44.
Tab. 2.44: Selection of the network provider depending on settings and situation
Settings in the routing table
Primary
network provider
Network provider 1
Network provider 1
–
–
If neither the network provider selected initially nor the alternative network pro-
vider is available, the call will be cleared down. The caller will obtain the conges-
tion tone.
Automatic alternative routing can be activated or deactivated throughout the sys-
tem.
Time Zones
The time zones are used to allocate network providers depending on the time of
day. This means it is possible to take account of the fact that network provider 3
for example is more cost effective at night than network provider 2.
If the time at which a connection is set up is outside the defined time zones the
call is routed in accordance with the subscriber configuration (without LCR func-
tion).
If the time indications of several time zones overlap, the time zone placed further
up in the table applies to the area of overlap:
Tab. 2.45: Example of overlapping time zones
Time zones Day(s)
Zone 1 Mon-Fri
Zone 2 Mon-Sun
HBT_20321104_02/B0_en
Response of the LCR function
Alternative
network
provider
- Routing to network provider 1; if this is not possible, routing in
accordance with the subscriber configuration
Network Route to network provider 1; if this is not possible, alternative
provider 2 routing to network provider 2
Network Routing in accordance with the subscriber configuration; if this is
provider 2 not possible, alternative routing to network provider 2
– Routing in accordance with the subscriber configuration
Time
07:00-16:59
00:00-23:59
ascom Ascotel 2025/2045/2065
Primary
network provider
Network provider 1
Network provider 2
Call Routing
Alternative
network provider
Network provider 2
–
2.163