ASCOM Ascotel 2025 System Manual page 703

ascom Ascotel 2025/2045/2065
Selection of Multiple Radio Units to measure (Display 2)
65<––.––.––
1000101511
haz0349aaxxb0
Fig. 3.40: Measure / Group state
Display of the Voice Quality (Bar Indicator = Standard Indicator)
1438 0s17.65
Hon $$$$
haz0346aaxxc0
Fig. 3.41: Measure and re-measure / locked state
3.72 Planning DECT Systems
• Field strength value of the first radio unit in the group
• This radio unit information is shown in the status line
When the signal is too weak, a line is shown instead of the radio unit number.
• Hexadecimal representation of the full RFPI
• RFPI: Radio Fixed Part Identity
• Handover notification (dot)
(if handover is successful, new RFPI appears without a dot)
• Field strength of the RU (dBµV)
• Quality bar indicator (CRC errors and field strength)
$$$$
– Very good
$$$
– Good
$$
– Sufficient
$
– Poor
.
– No signal
• Handset is synchronized to this radio unit
• Handover behaviour
– Hon = Enable handover by pressing the Foxkey
– Hoff = Bar handover by pressing the Foxkey
HBT_20321104_03/B0_en