ASCOM Ascotel 2025 System Manual page 284

KT Line as a normal Internal Line
If no KT route has been defined in the call distribution element ("KT route = -"),
the KT line will respond like an ordinary internal line. This means the subscriber
has to dial an exchange access prefix to be able to dial out to the public network.
The route is determined by the "Route" setting in the subscriber configuration.
Furthermore, the other settings in the subscriber configuration also apply.
The following number is presented as CLIP to the internal destination subscriber:
• The call number of the call distribution element, provided it has been allocated
in the numbering plan.
• The internal call number of the key telephone if the call distribution element
was not allocated a call number.
Note:
If a KT cost centre is entered in the call distribution element and a sub-
scriber cost centre in the subscriber configuration, the call charges are
allocated to both cost centres. This means the total sum of the call is
allocated twice.
HBT_20321104_02/B0_en
ascom Ascotel 2025/2045/2065
Routing Elements 2.107