ASCOM Ascotel 2025 System Manual page 263

ascom Ascotel 2025/2045/2065
Rules Applying to the Subscriber Group
Any member of a subscriber group can use the menu selection or a */# procedure
to log out of (#48xx) or log into(*48xx) a user group (see also "Features Over-
view", Page 2.435. Members who have logged out of a group are ignored during
call distribution. The last remaining member in a group does not have the possi-
bility of logging out of the group.
A subscriber may belong to several user groups at the same time. Logging out of
or in to user groups applies simultaneously to all the user groups or specifically for
one particular user group.
Any diversions to internal destinations that have been activated by group mem-
bers are observed.
Any diversions to external destinations and PISN subscribers will result in the
members concerned being logged out of the user group. The last member
remaining in the subscriber group does not have the possibility of activating an
external call diversion and cannot log out of the user group.
Call forwarding can be activated at any time.
If all the members are busy, the system will respond as follows:
• An external call will be routed in accordance with the emergency routing con-
cept (see Page 2.127).
• An internal call will be acknowledged with the busy tone.
Ascotel DECT Subscribers
Ascotel DECT subscribers can be entered in a user group in the same way as inter-
nal subscribers.
GAP Subscribers
The following restrictions apply to entering GAP handsets as UG members:
• Only one GAP subscriber per user group
• A user group with one GAP subscriber must not contain any other DECT sub-
scribers
2.86 Routing Elements HBT_20321104_02/B0_en