ASCOM Ascotel 2025 System Manual page 968

6.3 Reading the Initialisation Values
To check the initialisation values, use the following configuration:
1. From the AIMS Shell, create and open a new 2045-type system in offline
mode.
2. Open the Configuration Manager.
3. Add the following hardware in the "Hardware configuration":
– Slot 1: SC-16AD2 (default setting for the terminal type "unknown")
– Slot 2: TC-04AB
– Slot 3: ISDN-02PRA
– Slot 4: (empty)
– Slot 5: DSP-02
4. In the "Interface configuration" set interface 0.13 from T to S and the inter-
face type from ETSI to external S.
5. Under "Radio unit"set up an Ascotel DECT system in slot 0.8.
6. Under "DDI settings" set up the following DDI numbers:
– Press "New number".
– Enter 20 as the start value and 55 as the end value.
– Answer the prompt "Link matching subscribers?" with "Yes, also create
non-matching". Do not modify the default settings in the other fields of
the dialog box. The DDI numbers 20-55 are created with the relevant CDE.
7. Under "Subscriber"enter the following terminals at the following user-net-
work interfaces:
– Interface 1.1-1: Office 10
– Interface 1.2-1: Office 20
– Interface 1.3-1: Office 25
– Interface 1.4-1: Office 30
– Interface 1.5-1: Office 35
– Interface 1.6-1: Office 40
– Interface 1.7-1: Office 45
– Interface 1.8-1: Office 45pro
HBT_20321104_05/B0_en
ascom Ascotel 2025/2045/2065
Configuration Parameters 5.69