ASCOM Ascotel 2025 System Manual page 487

ascom Ascotel 2025/2045/2065
"Wait for Connection" Setting
Specifies whether a call diversion of an external call to the exchange is always
switched through or only if the called party answers a call (and a connection is
therefore set up):
• "Wait for connection = no"
The call diversion is always switched through.
• "Wait for connection = yes"
The call diversion is switched through only if a connection is set up.
If the destination subscriber is busy or unobtainable, this setting ensures that
the caller does not incur charges for the connection up to the PBX.
Example
Call diversion to a mobile network subscriber who has switched off his handset:
• If "Wait for connection = no" has been set, the call diversion will be switched
through: The callers will obtain a spoken text provided by the mobile network
provider, indicating that the required subscriber cannot be reached at present.
• If "Wait for connection = yes" is set, the call diversion is not switched through
and the caller will obtain the ring-back tone.
Scope
This feature is available only with stand-alone PBXs and gateway PINXs.
2.310 Features HBT_20321104_02/B0_en