ASCOM Ascotel 2025 System Manual page 706

Procedures for a Multiple Measurement
The field strength of 4 radio units simultaneously can be shown on the handset's
display. For measurement-related reasons such a multiple measurement is how-
ever not recommended.
Display in Look-around Mode
RFPI 0 17 65
go 1/7 ¥
haz0343aaxxb0
Fig. 3.45: Measure / Look-around state
Selection of an Individual Radio Unit to measure (Display 1)
1015 0 17 65
1000101511
haz0348aaxxb0
Fig. 3.46: Measure / Look-around state
Selection of the Radio Units to measure
tick.1/7 clr
haz0344aaxxa0
Fig. 3.47: Measure / Tick state
HBT_20321104_03/B0_en
• Serial number of the system
• Number of the location area of PBX
• Number of the radio unit
• Field strength of the first selected radio unit channel [dBµV]
• Scroll through the radio units detected
• The top line shows the first of 7 detected radio units.
• Measurement not yet running (press the Foxkey to start the measure-
• Serial number of the system
• Number of the location area of PBX
• Number of the radio unit
• Field strength of the best radio unit channel [dBµV]
• Hexadecimal representation of the full RFPI
• This radio unit is already selected
• Press the Foxkey to select this radio unit (toggle)
ascom Ascotel 2025/2045/2065
Planning DECT Systems 3.75