ASCOM Ascotel 2025 System Manual page 800

Disconnecting the Connecting Wires
Fig. 4.21: Disconnecting the connecting wires
Use a size 1 screwdriver to loosen the connecting wires.
1. Insert the screwdriver into the rectangular aperture.
2. Press the screwdriver down until the wire clamp opens, and pull out the con-
necting wire.
Note:
Direct connection is also possible using stranded copper conductors (litz
wires), conductor diameter 0.4 to 0.8 mm, and the corresponding com-
mercial clamps (e.g. Messrs. Riacon; type 166; contact spacing 3.5 mm;
2-pin Order No. 311661 02, 4-pin Order No. 311661 04 or 8-pin Order
No. 311661 08). Ensure sufficient strain relief!
HBT_20321104_04/B0_en
4
3
2
1
ascom Ascotel 2025/2045/2065
Connecting the PBX 4.29