ASCOM Ascotel 2025 System Manual page 1048

Configuring a Local Signal Destination on a V.24 Interface
The local signal destination is connected to the V.24 interface of the mainboard
or Pocket Adapter (PA).
The "Local Output Interface" must be set on "Printer" in the Fault & Maintenance
Manager.
The following parameters need to be selected or entered in the Fault & Mainte-
nance Manager:
• Location of the V.24 interface to which the local output destination is con-
nected (V.24 Main = Mainboard; V.24 PA = Pocket Adapter)
• Required output format "PC" or "Text" (see "Output Formats", Page 7.50)
• With "Text" output format: Language (de / fr / it
messages are to be printed out.
• With the V.24 interface of the mainboard - port number
• With the V.24 interface on the PA - port address
• With "Text" output format and printer as the output location: Maximum page
length of the printout
1)
Depending on the country, the third language can also be a different one.
The language set here is also used for event messages in message group 8 (Ascotel 2025 / 2045) and 16
(Ascotel 2065) respectively.
HBT_20321104_07/B0_en
ascom Ascotel 2025/2045/2065
1)
/en ) in which the event
Operations Supervision 7.49