ASCOM Ascotel 2025 System Manual page 696

Standard Handset Operation
The standard handset corresponds to the normal system handset and can also be
used for planning purposes.
Here we shall only be discussing the procedures required for planning.
To switch between normal mode and test mode ("TEST" displayed), proceed as
follows:
• From normal mode to test mode:
– Press the "M" key repeatedly until "PRG1" appears.
– Now press the "M" key repeatedly until "Test" appears.
– Press the Foxkey when "Test" appears.
• From test mode to normal mode
– Press the "C" key repeatedly until you exit the test menu.
Menus in the Test Mode:
Two menus are available when you access the test mode (see menu structure in
Fig. 3.32 to Fig. 3.36).
Menu 1: "Look"
This menu takes you to the menus for measuring the coverage ranges of radio
units.
Fig. 3.31: Look-around mode
HBT_20321104_03/B0_en
RU A
ascom Ascotel 2025/2045/2065
RU B
Planning DECT Systems
Existing
DECT system
DECT
haz0339aaena0
3.65