ASCOM Ascotel 2025 System Manual page 42

ascom Ascotel 2025/2045/2065
Part 3: Planning
The customer's requirements are the prime concern when expanding a system.
The objectives, demands and requirements of the customer must be reconciled
with the technical circumstances and possibilities. Part 3 supports you in accom-
plishing the following tasks:
• Determining customer needs
• Coordinating objectives, requirements, wishes and possibilities
• Drawing up a rough concept
• Planning the system
AIMS Managers provide assistance when planning the system
The planning of DECT systems is examined in particular detail. Cordless systems
require not only that you determine the customer's requirements, wishes and cur-
rent communication situation, but also that you carry out meticulous measure-
ments to ascertain the site conditions.
Part 4: Installation
In Part 4 you will find information on the installation and wiring of the system and
on the choice of the right installation material. This is followed by a description of
how to wire up the different types of network interfaces, user-network interfaces
and special interfaces, and how to connect the terminals.
The sequence of chapters in Part 4 corresponds to the procedure in installation
practice:
• Mounting, preparation and connection of a system
• Installation of the system and expansion cards
• Connection of the terminals
At the end of Part 4 you will find a checklist for verifying the installation.
HBT_20321104_00/B0_en Target Audience and Structure of the System Manual 0.7