ASCOM Ascotel 2025 System Manual page 69

ascom Ascotel 2025/2045/2065
3.1.1.3 Point-to-Point and Point-to-Multipoint Connections
Basic accesses can be configured as point-to-point or as point-to-multipoint ("TEI
Management" setting in the configuration of the network interfaces).
Point-to-Multipoint Connection without a PBX
The basic access in point-to-multipoint configuration allows a selective dial-up of
the terminals connected in parallel using MSN, the Multiple Subscriber Number.
Here the network itself provides a kind of direct dialling, so to speak.
MSN 1: 653 12 33
MSN 2: 653 12 34
MSN 3: 653 13 45
NT1: Network Termination
MSN: Multiple Subscriber Number
Fig. 1.5: Single basic access in point-to-multipoint configuration
Note:
The fax with ISDN connection is implemented as a fax card in a PC.
1.14 System Interfaces
NT1
U
haz0319scxxb0
Fax
MSN 1 MSN 2 MSN
HBT_20321104_01/B0_en
3