ASCOM Ascotel 2025 System Manual page 37

ascom Ascotel 2025/2045/2065
Before Commissioning
Check for completeness when unpacking the delivered system. Complaints are to
be settled within an appropriate period.
Damaged Components
Check the components for damage. Damaged systems or components must not
be put into operation.
Foreign Matter in the Hardware
Do not put the hardware into operation if objects or liquids have got inside it.
Hazard:
There is a risk of electrical shock or short-circuits if the hardware is dam-
aged in any way or if liquids or objects get inside the equipment.
Immediately disconnect the system from the power supply (mains as
well as UPS and DC power supply if present).
Mounting Instructions
Observe the following stipulations when installing the system:
• Do not expose the system to direct sunlight or other sources of heat (radiators).
Observe the guaranteed temperature range.
• Observe the minimum distances specified in the assembly guidelines.
• To ensure the necessary circulation of air, do not obstruct the system's cooling
ducts.
• The premises in which the system is installed must meet the following require-
ments:
– Protected against water, condensation and humidity
– Well ventilated
– Observance of the permitted humidity range
Hazard:
Explosion hazard through operation in areas subject to explosion haz-
ards.
Do not install the systems in areas subject to explosion hazards.
0.2 Safety and Commissioning HBT_20321104_00/B0_en