ASCOM Ascotel 2025 System Manual page 41

ascom Ascotel 2025/2045/2065
Part 1: System Overview
Part 1 contains information on the expansion of the systems, interfaces, network-
ing types, terminals, supplementary equipment and AIMS (Ascotel Information
and Management System).
Always refer to Part 1 whenever you need basic information, for instance the table
of interface types or the definition of a networking technology term.
Part 2: System Functions and Features
Part 2 provides an overview of the system's functions and features. Knowing all
about these functions and features is an essential requirement for providing cus-
tomer-oriented planning and implementation of systems.
System Functions
This chapter is based on the principles of the networking philosophy discussed in
Part 1 and features the different types of internal and external numbering plans
for private and public networks.
Other system functions:
• Subscriber identification and display using CLIP (Calling Line Identification Pres-
entation) and CNIP (Calling Name Identification Presentation)
• Routing Elements and the way they interact in distributing incoming and out-
going calls to network and user-network interfaces
• Routing data services to destination tables or individual destinations
• Logging and output of call data and call charge data
Numerous examples are used to illustrate this complex subject and to make it eas-
ier to understand.
Features
Each subscriber has the possibility of activating a multitude of features in day to
day telephony operations. Depending on the terminal type connected, this is done
using function keys and menu-driven key sequences. Most of these features can
be activated using */# procedures even on terminals with the lowest level of fea-
tures. The table in "Features Overview", Page 2.435 provides an overview of the
features available with the different terminal types.
0.6 Target Audience and Structure of the System Manual HBT_20321104_00/B0_en