Replacing The Separating Knife - Roland TrueVIS VG2-640 User Manual

Replacing the Separating Knife

If the separating knife becomes dull, replace it with the included replacement knife.
Be sure to perform operations as specified by the instructions, and never touch any area
CAUTION
not specified in the instructions.
Otherwise sudden movement of the machine may cause injury.
Do not touch the tip of the separating knife.
CAUTION
Doing so may result in injury.
Required items
Replacement blade for separating knife
Procedure
1.
Remove any media.
2.
Press [MENU].
3.
Press [▼] several times to display the screen shown below.
MENU
SUB MENU
4.
Press [▶] once, and then press [▼] several times to display the screen shown below.
SUB MENU
MAINTENANCE
5.
Press [▶] once, and then press [▼] several times to display the screen shown below.
MAINTENANCE
REPLACE KNIFE
6.
Press [ENTER].
The cutting carriage moves to a position where blade replacement is possible.
7.
When the following screen is displayed, open the front cover.
OPEN FRONT
Preparation is complete once the following screen is displayed.
FINISHED?
8.
Remove the separating knife.
(1)
Loosen the screw until it slips out.
(2)
Grasp the screw portion, and slowly pull in the direction of the arrow.
When doing this, do not pull it back toward you.
COVER
Replacing the Blade/Separating Knife
4. Replacing Consumable Parts
269