The Printer Unit Does Not Run
Is the power switched on?
Switch on the printer's main power, and then press the sub power switch and make sure the sub power switch
lights.
RELATED LINKS
・ P. 26 "Turning the Power On"
Is [SETUP] lit?
Output is not performed when [SETUP] is not lit. After loading the media, lower the loading lever, and then press
[ENTER].
RELATED LINKS
・ P. 74 "Step 2: Starting Output"
Are any covers open?
Close the front, left, and right covers.
Is the top menu displayed?
Top menu
W1100mm
If the top menu isn't displayed, output doesn't start even when data is sent from the computer. To go to the top
menu, press [MENU].
RELATED LINKS
・ P. 74 "Step 2: Starting Output"
Is [PAUSE] lit?
When [PAUSE] is lit, operation is paused. To resume, press [PAUSE]. [PAUSE] turns off and output resumes.
RELATED LINKS
・ P. 52 "Pausing and Canceling Output"
Is a message displayed on the screen?
RELATED LINKS
・ P. 298 "Messages"
・ P. 300 "Error Messages"
Are the cables connected?
Connect the cable securely.
291
4. Machine Problems