Roland TrueVIS VG2-640 User Manual page 84

3.
Set the blade force.
For high-quality cutting, perform a cutting test to check the cutting quality for the media and adjust the blade
force.
Procedure
1.
Press [▶] to select "NEXT".
HEAD HGT LOW
CHANGE [NEXT]
2.
Press [ENTER] to confirm your entry.
3.
Press [▶] to select "NEXT".
CALIBRATION
SET [NEXT]
4.
Press [ENTER] to confirm your entry.
5.
Press [▶] to select "NEXT".
MEDIA GAP ADJ.
[SET] NEXT
6.
Press [ENTER] to confirm your entry.
7.
Press [◀] to select "YES."
CROP-CUT ADJ.
SET [NEXT]
8.
Press [ENTER] to confirm your entry.
9.
Press [◀] to select "YES."
CUT FORCE
[SET] NEXT
10.
Press [ENTER] to confirm your entry.
The test pattern is cut.
You can select "NEXT" and press [ENTER] to skip the current menu and proceed to the next menu.
11.
Peel off the two cut shapes (a circle and a square).
12.
Check how the two shapes peel off.
• Two shapes are peeled off together/backing paper is also cut
Press [◀] to select "YES".
CONTINUE ADJ.?
[YES] DONE
• Two shapes are peeled off separately
Press [▶] to select "DONE".
Cutting Output
83
2. Cutting Method