Roland TrueVIS VG2-640 User Manual page 103

Printing and Cutting Output
10.
Check how the two shapes peel off.
• Two shapes are peeled off together/backing paper is also cut
Press [◀] to select "YES".
CONTINUE ADJ.?
[YES] DONE
• Two shapes are peeled off separately
Press [▶] to select "DONE".
CONTINUE ADJ.?
YES [DONE]
11.
Press [ENTER] to confirm your entry.
• If you select "YES", the test pattern is cut again. Go back to step 12 and perform the setting again.
• If you select "DONE", proceed to step
102
3. Printing and Cutting Method
7.Correct the misalignment of the printing and cutting positions.(P. 103)
.