Messages
CALIB. FAILED
(TOO DARK)
CALIB. FAILED
TRY AGAIN
If the same message appears even after you redo correction several times, contact your authorized Roland
DG Corporation dealer.
9.
Press any one of the keys on the operation panel to display the screen shown below.
CROPSENS CALIB
SENS CALIB.
Accurately Adjusting the Settings for Cutting with Crop Marks
Cause
• The reflection from the media is too
weak.
• Correction failed for some reason.
Countermeasures
• Change the media type.
• Redo the correction.
1. Optimizing the Output Quality
185