Replacing The Separating Knife - Roland TrueVIS VG-640 User Manual

Replacing the Separating Knife

If the separating knife becomes dull, replace it with the included replacement knife.
CAUTION
CAUTION
Required item
Replacement blade for
separating knife
1.
Enter the "REPLACE KNIFE" menu.
A
Remove any media.
B
Press [MENU].
C
Press [ ] several times to display the screen shown below.
MENU
SUB MENU
D
Press [ ] once, and then press [ ] several times to display the screen shown below.
SUB MENU
MAINTENANCE
E
Press [ ] once, and then press [ ] several times to display the screen shown below.
MAINTENANCE
REPLACE KNIFE
F
Press [ENTER].
The cutting carriage moves to a position where blade replacement is possible.
G
When the following screen is displayed, open the front cover.
Be sure to perform operations as specified by the instructions, and never
touch any area not specified in the instructions.
Sudden movement of the machine may cause injury.
Never touch the tip of the knife.
Doing so may result in injury.
Replacing Consumable Parts
3
109