Roland TrueVIS VG2-640 User Manual page 181

Accurately Adjusting the Settings for Cutting with Crop Marks
2.
Print only the crop marks.
Procedure
1.
Press [MENU].
2.
Press [▲] to display the screen shown below.
MENU
CUTTING MENU
3.
Press [▶], then [▼] to display the screen shown below.
CUTTING MENU
CROP-CUT ADJ.
4.
Press [▶] twice to display the screen shown below.
TEST PRINT
PRINT ONLY
5.
Press [ENTER].
Printing of the test pattern starts.
Only one crop mark is printed.
6.
When printing is finished, press [MENU] to go back to the original screen.
7.
Remove any media.
If the media needs to be separated, refer to the following page.
P. 47「Separating the Media」
8.
Complete operations before cutting output for normal cutting with crop marks, such as laminating.
180
1. Optimizing the Output Quality